Loading a Rust library as a Lua module in Neovim


Dheepak Krishnamurthy


August 6, 2021


rust, nvim, neovim, lua, mlua

I was curious if it would be possible to write a lua plugin in pure rust. It turns out this is quite straightforward.

TLDR: You can use rust with a library like mlua to compile a cdylib shared library that is also a valid lua module which then can be loaded by neovim. The link to the git tree for all the code in this blog post is here.


Neovim v0.5.0 is out and has good support for using lua as an alternative to vimscript. You can now use a init.lua file instead of a .vimrc. There are now a bunch of really awesome plugins written in pure lua1.

1 You can find curated lists of neovim plugins and related projects here and here.

One reason I think there’s a lot of neat neovim plugins is that lua is a neat language: it is small and fast when using luajit, which neovim supports. Lua is also a clean and simple language, and has support for nice metaprogramming constructs and syntactic sugar that make code easy to read and write.

However, there are a few things that can be quite odd or annoying when writing code in lua. There is no support for continue statements (although there is an acceptable workaround using repeat break until true). The standard library for string handling and manipulation is quite bare bones, and you have to heavily rely on using string:gsub with pattern matching. And as far as I can tell, there’s no Unicode support in the language. Neovim also uses lua 5.1, since that is the latest version of lua that works with luajit. And this means some of the improvements in lua 5.2 and lua 5.3 are not available to neovim users.

Admittedly, these are quite minor gripes in the language. And there are lots of awesome packages from LuaRocks that more than make up for the lack of a batteries included standard library in lua.

Additionally, there are programming languages like Fennel (a language that uses lisp syntax and provides a macro system), that compile to lua. Using fennel and the macro support provided by the language can make the configuration of your neovim settings concise and clean. Naturally, the neovim community have built excellent tools like Aniseed and hotpot.nvim to make it possible to write your entire configuration in fennel instead of lua. Alternatively, there’s even a TypeScript to lua transpiler, for those so inclined.

I figured it would be nice to write a lua plugin in pure rust and I wanted to explore how to go about doing that. Rust has metaprogramming features like macros, has a batteries included standard library and a thriving package ecosystem to boot. And more importantly, I like writing code in rust.

Traditionally, writing a neovim plugin in rust can be achieved by neovim’s RPC mechanism2. However I was curious to see what it would take to make it happen using a native lua module. This blog post is a summary of the scaffolding required to get a hello world lua plugin written in rust set up.

How it works

When a require 'mymodule' expression is encountered in lua, the lua interpreter searches for mymodule.lua and mymodule.so files in a bunch of predefined locations. This is the output of typing :lua require'mymodule' in neovim:

E5108: Error executing lua [string ":lua"]:1: module 'mymodule' not found:
        no field package.preload['mymodule']
        no file './mymodule.lua'
        no file '/Users/runner/work/neovim/neovim/.deps/usr/share/luajit-2.1.0-beta3/mymodule.lua'
        no file '/usr/local/share/lua/5.1/mymodule.lua'
        no file '/usr/local/share/lua/5.1/mymodule/init.lua'
        no file '/Users/runner/work/neovim/neovim/.deps/usr/share/lua/5.1/mymodule.lua'
        no file '/Users/runner/work/neovim/neovim/.deps/usr/share/lua/5.1/mymodule/init.lua'
        no file '/Users/USER/.cache/nvim/packer_hererocks/2.1.0-beta3/share/lua/5.1/mymodule.lua'
        no file '/Users/USER/.cache/nvim/packer_hererocks/2.1.0-beta3/share/lua/5.1/mymodule/init.lua'
        no file '/Users/USER/.cache/nvim/packer_hererocks/2.1.0-beta3/lib/luarocks/rocks-5.1/mymodule.lua'
        no file '/Users/USER/.cache/nvim/packer_hererocks/2.1.0-beta3/lib/luarocks/rocks-5.1/mymodule/init.lua'
        no file './mymodule.so'
        no file '/usr/local/lib/lua/5.1/mymodule.so'
        no file '/Users/runner/work/neovim/neovim/.deps/usr/lib/lua/5.1/mymodule.so'
        no file '/usr/local/lib/lua/5.1/loadall.so'
        no file '/Users/USER/.cache/nvim/packer_hererocks/2.1.0-beta3/lib/lua/5.1/mymodule.so'

If a mymodule.so file exists, lua checks if it can call luaopen_mymodule as a function using the C ABI3. This is the template one would follow to write a lua module in C:

static int l_dir (lua_State *L) {

static const struct luaL_reg mylib [] = {
  {"dir", l_dir},
  {NULL, NULL}  /* sentinel */


int luaopen_mymodule (lua_State *L) {
  luaL_openlib(L, "mymodule", mymodule, 0);
  return 1;

This is not unlike how Python loads C shared libraries as Python modules.

This means any shared library that exposes the C ABI lua expects is also a valid lua module. And therefore you can create a lua module that can be imported in neovim’s built in lua interpreter from any programming language that allows you to create shared libraries.

Enter rust. Rust can compile into a shared library exposing a C ABI. All one would have to do is expose the functions required for a valid lua module. However, without any third party support however, this will involve lots of unsafe code. Fortunately, there’s a actively maintained project called mlua that lets you create a lua module from a rust library (among other features supported by mlua) using rust’s metaprogramming constructs.

First, you will need the following in your Cargo.toml:

crate-type = ["cdylib"]

mlua = { version = "*", features = ["luajit", "vendored", "module", "macros"] }

It is important to use the features flag and add luajit, vendored, and module to the list.

Now we can create a file src/lib.rs with the following contents:

use mlua::chunk;
use mlua::prelude::*;

fn hello(lua: &Lua, name: String) -> LuaResult<LuaTable> {
    let t = lua.create_table()?;
    t.set("name", name.clone())?;
    let _globals = lua.globals();
    lua.load(chunk! {
        print("hello, " .. $name)

fn moonshine(lua: &Lua) -> LuaResult<LuaTable> {
    let exports = lua.create_table()?;
    exports.set("hello", lua.create_function(hello)?)?;

This is equivalent to the following lua code in a file called moonshine.lua:

local M = {}

function M.hello(name)
  t = {name = name}
  print("hello, " .. name)
  return t

return M

The name of the function that is annotated with the #[mlua::lua_module] must be the name of the lua module you intend to build. In my case, I called the function moonshine. This will allow me to use require'moonshine' in lua.

For MacOS, we also have to add the following to .cargo/config:

rustflags = ["-C", "link-arg=-undefined", "-C", "link-arg=dynamic_lookup"]

rustflags = ["-C", "link-arg=-undefined", "-C", "link-arg=dynamic_lookup"]

We need to do this because we need to tell the rust linker that the symbols used in the shared library may not be defined at link time, and will only be available when the shared library is loaded.

Finally, we can create an instance of the shared library using cargo build --release. Neovim adds the lua folder of plugins to the runtimepath. So to follow convention, we can move libmoonshine.dylib to the lua folder. Lua looks for .so files even on a Mac, so we have to rename the file. Notice rust compiles the library to libmoonshine.dylib, but the lua module need to be moonshine.so.

$ cargo build --release && mv target/release/libmoonshine.dylib lua/moonshine.so

Here is a tree view of the folder structure.

$ tree -a
├── .cargo
│  └── config
├── .git
│  └── ...
├── .gitignore
├── Cargo.lock
├── Cargo.toml
├── lua
│  ├── .gitkeep
│  └── moonshine.so
├── README.md
└── src
   └── lib.rs

We can add this folder manually to neovim’s runtimepath using the packadd or using the Packer package manager:

local execute = vim.api.nvim_command
local fn = vim.fn

local install_path = fn.stdpath('data')..'/site/pack/packer/start/packer.nvim'

if fn.empty(fn.glob(install_path)) > 0 then
  fn.system({'git', 'clone', 'https://github.com/wbthomason/packer.nvim', install_path})
  execute 'packadd packer.nvim'

local packer = require('packer')
local use = packer.use

    use {

Now in neovim, after a PackerInstall and PackerCompiler you can run :lua print(vim.inspect(require'moonshine'.hello("rust"))):


Why is this useful

Rust has well established libraries for parsing datetime, dealing with unicode, for concurrency and parallelism, and much much more. This can be useful in developing a lua plugin for neovim that wants to expose features available in a rust package.

A similar approach can probably be used to write a lua plugin in nim using nimLUA or in Go using gopher-lua or in any language of your choice that can compile to a shared library.

This approach does have some downsides though. If you happen to segfault, whether it is due to an incorrect usage of the Lua C API or any other library or reason, you will take neovim down with you. And you will still have to learn the Lua C API to interact with tables and functions in Lua to access the neovim API for anything moderately complex. In theory, the performance of this approach to be better than using the RPC approach, however in practice it wouldn’t make any difference for most if not all real world use cases.



BibTeX citation:
  author = {Krishnamurthy, Dheepak},
  title = {Loading a {Rust} Library as a {Lua} Module in {Neovim}},
  date = {2021-08-06},
  url = {https://kdheepak.com/blog/loading-a-rust-library-as-a-lua-module-in-neovim},
  langid = {en}
For attribution, please cite this work as:
D. Krishnamurthy, “Loading a Rust library as a Lua module in Neovim,” Aug. 06, 2021. https://kdheepak.com/blog/loading-a-rust-library-as-a-lua-module-in-neovim.